...helps you take charge of the way you look and feel!
Product Performance Tests

Test No. MI-128/01.
Masking Lotion Water Resistance


Objective: To evaluate Millefolium masking lotion's water resistance compared with a leading brand.

Apply 0.5 ml of masking lotion and spread it evenly on the hand. Let it dry for 10 minutes at 60% R.H.

Millefolium       Leading Brand


After 3 minutes under running water on the affected area at a speed of 6 liter/min. Water temperature 20C at a distance of 10cm.

Millefolium       Leading Brand


Result shows that Millefolium Masking lotion is not affected. Leading brand partially comes off, it has less water resistance.


Test No. MT-12419.
Hair Building Fiber Adhesion to Hair/Scalp


Objective: To evaluate Magic Hair's adhesion to hair/scalp and compare it with a leading brand of hair building fiber.


Before application


After application of one thin coat
Millefolium
Magic Hair


Leading brand of
Hair building fiber


After a stream of air from a hair dryer at air speed 1 liter/sec is directed toward the applied area for 30 sec from an angle of app. 45 degrees at a distance of 20 cm.
Millefolium
Magic Hair


Leading brand of
Hair building fiber


Results. As the picture shows, Magic Hair shows good adhesion to hair scalp with no sign of any separated fiber due to the air flow. Leading brand at least 70% blown off.

Conclusion: Leading Brand can only be used safely if application is followed by a hair spray.

Test NoMT-98/12
Masking Lotion Drying Time


Objective: To evaluate Millefolium masking lotion's drying time compared with a leading brand by using the FM510 conductivity meter.

Apply 0.5 ml of Masking lotion on the hand. Evenly spread it. Let it dry for 10 minutes at R.H.60%. Measure conductivity after 5 minutes.

Millefolium

Results:
G = 2 (1/Ohm)
Indicating that the application area is dry.

Leading brand

Results:
G = 21 (1/Ohm)
Indicating that the application area is not yet dry.

All content ©2015 Millefolium
Powered by RocketZoomWeb.com